Monday Progress Update: January 7th

I feel like I only got little stuff accomplished this week, which is crazy since I almost completed two costumes, but there's no reasoning with the crazy.

First, details on Maghda I finished:

I got the center front piece painted and mounted on the corset.

I used my new duct tape pattern method to make a pattern for all the decorations on the horns.  No decorations yet though.

I hated how my tights turned out last week.  They were too dark, too bluish, and overall not what I wanted.  I played around with taking the dye out, but I ended up painting over them with Lumiere paint in Pearlescent White.  It ended up pretty good, close to the metallic silver body paint I'll be using on my face and chest.  It was an interesting few days with me wearing the tights around the house while painting them or them being wet because I wanted to paint them stretched so they didn't dry too small.  After finishing painting I put on the stirrup pants and marked them just above the knee.  I then cut off the stirrups and sewed them to the tights, cutting off the extra tight below the seam.  The stirrups  have an annoying logo I have to get rid of, then they get gold decorations on them.

I didn't like how plain my hip armor was, so I made these diamond inserts with worbla and made lines with hot glue before I painted them.  Then I hot glued them in place (a few times until I figured out the placement I liked).

 The headdress has all these little four-pointed stars on it.  I was going to cast them, but it was taking forever and I didn't like the results (and all the wasted casting plastic) so I went through my stash and found htese little four-pointed knot beads in silver.  Of course, they needed to be gold, so I painted them.

I've also got these decorations cast and painted.  One of the circular pieces goes on the corset and the other two are for the tights, and the stars are for the tights too.

 Next I worked on Ladies Night, and I finished it.  There's the corset with bubble ruffled mirror organza and a big sequin fabric heart, the skirt with a darted yoke and pleated bottom, and the furry blue legwarmers with elastic for right above the knee.  I even found the perfect accessory:

 I'm still on the lookout for a baby pink rhinestone bracelet, but otherwise that costume is done, even the wig (which thankfully doesn't need styling).



Next I worked on Song 4 U.  I ended up finishing the dress in a day, and hemming it the next day so it's all but done.  I made a mock up of a sheath dress and fitted it to the knees.  Then I made a boned base out of a heavy sateen and a cover out of casa satin.  Over the cover I gathered chiffon in bunches.  I had to tack a lot of that by hand.  The skirt is a circle skirt with a back train gore out of circle ruffle bridal fabric.  The bare space between the skirt and the chiffon is supposed to be covered in a straight-line ruffle fabric, I didn't figure that out until I got the cd with the making-of-the-video on it on Thursday, hopefully I can find some, otherwise I'll probably improvise with more circle ruffle fabric.  The second picture is the skirt picked up in points like it is in the video.  I'm still deciding if it needs a petticoat to fluff out the skirt or not.

I also finished the bracelet for the costume:

This week I need to make the bugs for Maghda's outfit.  I'm hoping that a trip to the model train hobby store will end up with them motorized so they flap their wings, but that's still very much up in the air.  I also need to hit my bustle dress hard and hopefully finish it so that all I have to finish next week is Vanellope and details on Maghda.  At least with the productive weekend I'm back on track with my to-do lists, so that's a good thing, even if tomorrow is hellish.

Monday Progress Update: December 31

It's been a week of Diablo, more Diablo, and then more Diablo.  I did take a little time out for my Historical Sew Fortnightly, but that'll be another post.  Here's what I've accomplished along the way:

I started the headdress by making a mock-up horn out of tin foil.  I just kept adding foil and shaping it until it seemed right on my head.

Then I made a skullcap out of fosshape steamed over my plaster form of my head (with my hair in a wig cap, so it's big enough for all that hair) and  made two horns out of fosshape.  They're standing on their own, but they're also soft so they squish a bit and they're less likely to poke someone's eye out if I turn fast.

I then spray-painted the form black, thinking that if any of the white showed through it would be less obvious.  It only resulted in this dirty grey, though, so I abandoned that idea pretty quickly.  I then draped the horns with the black spandex I was using for the hat and sewed it on by hand.

Next I made the cowl using a pattern for a child's ninja costume (it was small enough for stretch) and cut holes for the horns before hand-sewing it on, too.
 

To start the hip belt thing I made a body double of my lower half out of saran wrap and masking tape.

I pinned this to my dress form and used a marker to draw out the rough shapes of what I wanted the pieces to look like.  Then I cut them out and used them as a template for the armor.  I used a method close to Kamui's Wonderflex Tutorial, substituting worbla for wonderflex on the top layer.

This involved cutting each pattern piece out of craft foam and sandwiching it between a piece of wonderflex and a piece of worbla.  The worbla is the top layer because it is smooth for painting.  I also found that it was easy and convenient to use a metal bookmark I had laying around to seal the edges and give it a nice, smooth, sharp corner.  After constructing all the pieces I again heated them and glued them together.  I then took all the pieces that were going to be green and spray-painted them black to give the paint a darker background to reflect against.

Here is the first layer of green paint.  I used Metallic Green Lumiere brush-on paint, and painted all my strokes in a vertical manner to give the paint a bit of the stripeyness that beetle shells have.  After each coat I went back with a dry rough brush and scratched in more vertical lines just to enhance this effect.  This picture is one coat half done.

And here is the hip piece with four coats done.  I experimented with enclosing the edges with tubing like I did with my Army Dawn costume, but I didn't like the effect it gave so I removed it and instead painted the edges gold.  For the bracers I cut out another set of raised designs and spray painted those gold.  For the back piece I used model magic to sculpt the bug head and the stinger dimensionally and attached them before spray painting the whole piece gold.  For all the gold I used Testor's Gold Metallic paint because it comes in both a spray paint form and a brush on form, so I can spray paint pieces quickly and then use the brush on paint for touch-ups.

Next was the issue of attaching the pieces to the costume.  I decided to hang everything from a belt.  I got a bunch of parachute buckles and black web belting and made a belt.  Then I used my scrap wonderflex/worbla to attach a wire to the hip pieces.  I attached a parachute buckle to the wire, and then I pinned the corresponding buckle piece to the belt with a safety pin so that it's repositionable later on.  For a backup I hot glued a piece of velcro to the hip piece, soft side out so that it wouldn't snag my skirt, and pinned a corresponding piece of velcro on the belt.  For the back piece I attached it using two pieces of velcro and a turn buckle.  I'm not sure I like the gold trim on the hip pieces, I may be making a separate guard like my arm bracers have.

I've also finished the corset from last time.  The corset is the outer layer, an inner strength layer of black trigger, and an inner lining of black fleece.  I installed a separating zipper up the back to get in and out of it.  I guess it's less a corset and more of a boned bodice in how it holds me in, but I like the effect.

For the skirt I cut a piece of purple silk in a rectangle.  Using a rotary cutter I cut strips of the silver dupioni and sewed them together before using them to bind the edges of the silk.  I finished the waistband with a simple casing around an elastic band.

 Next  I worked on the neck corset.  I made a pattern by once again getting wrapped in saran wrap and masking tape.

Using that I made a pattern.  Piece 1 will be black, the rest will be purple.  The difficult part of this corset is that the back goes up so high on the head and I wanted to get the curve of my head in there as well.

Next I cut the pieces out of fashion fabric (black satin and interfaced purple silk), trigger for strength, and a black thin cotton lining, and put them together.  The bone casings are on each seam, topstitched in black because I liked the effect of highlighting the seaming even though it can't be seen on the original (I think it would be too small a detail to include anyway). I only boned the back three seams, the others were too short and also were stiff enough without boning (what with all the seam allowance on three layers and the boning casing).  I bias bound each section with its corresponding color, and put closure on the center front of black velcro.

After these pictures I tacked the back of the corset to the cowl so that it doesn't stick out anymore.  I also added the ruffle in.

I made the stars that are all over this costume and the center corset decoration out of oil clay.  I've molded those so that tomorrow I can cast tons of stars and a pretty gold corset deco.

I made the front belt piece, too, this time out of Fimo.  Here it is after being baked.  I'll glue it together, paint it, and then figure out how to attach it to the belt.

Here are my tights dying.  I'm going to do a cobbling together of these tights and some black stirrup pants for the leggings.

And, finally, some random black fabric pieces added to my gauntlets and to the center front of the corset.  Details coming together!